 | |
 | |
Honeyville Flanged U-Trough Screw Conveyors are a product that has been put into our grain handling line to fill a niche where limited space is a problem. The U-Trough can be used in applications where you need to "force feed" a product that can't be done with a chain type convey system.
SOME of the features include.
- Flanges connectors: Pre-fitted and welded to the u-trough ends.
- Galvanized covers: Standard bolt on covers.
- Dodge Gear drives: Torque Arm II speed reducers with overhead motor mounts and belt guards.
- Motor mount options: Overhead, Left, or Right side mounts available.
- Screw options: Helicoid, Sectional, or shorter pitches.
- #226 Hanger Bearings: Options of Wood or Nylon designed for your specific application.
- Trough section: Hot dipped galvanized.
- See chart below for specifications.
U-Trough Brochure
| U-Trough Auger Specifications | ||||||||
| Auger Dia. | Tube Dia. | Tube Ga. | Capacity Range in BPH | A | B | C | D | E |
| 6" | 7" | 14 ga. | 200 - 450 | 120" | 60" | 6" | 6" | 8-11/16" |
| 9" | 10" | 14 ga. | 500 - 2,000 | 120" | 60" | 10" | 10" | 13-1/4" |
| 12" | 13" | 12 ga. | 2,000 - 3,500 | 144" | 72" | 12" | 12" | 15-3/16" |
| 14" | 15" | 12 ga. | 3,500 - 5,500 | 144" | 72" | 14" | 14" | 17-3/16" |
| 16" | 17" | 12 ga. | 6,500 - 8,000 | 144" | 72" | 16" | 16" | 19-3/16" |
| U-Trough Auger Specifications (cont'd) | |||||||
| Auger Dia. | Tube Dia. | F | G | H | J | K | L |
| 6" | 7" | 2-3/8" | 8-1/16" | 7" | 10" | 4-7/16" | 10-1/4" |
| 9" | 10" | 2-1/8" | 11-1/8" | 10" | 13-1/2" | 6-1/8" | 13-3/4" |
| 12" | 13" | 3-1/8" | 14-1/4" | 13" | 17-1/2" | 7-3/4" | 17-1/4" |
| 14" | 15" | 3-1/8" | 16-3/4" | 15" | 19-1/2" | 9-1/4" | 19-7/8" |
| 16" | 17" | 3-1/8" | 19-1/8" | 17" | 21-1/2" | 10-5/8" | 23" |